Demonstration site
Standing seam metal roof
Service 02 / 06 · Standing-seam metal

24-gauge Galvalume. Mechanically locked. Fifty years.

Architectural standing-seam metal — snap-lock or field-seamed — fabricated on-site for continuous panels with zero exposed fasteners. The same finish spec'd on stadiums and skyscrapers.

See panel profiles
50 yr
Kynar finish warranty
140 mph
wind uplift tested
A
fire & impact class
−40%
summer attic load
M 01 · Panel library

Four profiles. Roll-formed on site.

Panels are fabricated on our portable roll-former at the property — eliminating horizontal seams on runs under 50 ft.

SS-150 · Spec detail

1.5″ Snap-Lock Standing Seam

Concealed-clip snap engagement. Ideal for residential pitches 3:12 and above.

Panel
16″ width · 24-ga
Finish
Kynar 500® PVDF
View full spec page
What's in this option
  • Hand-engaged snap lock — no field seamer required
  • Concealed 316 stainless clip at 24″ o.c.
  • Roll-formed on-site to exact eave-to-ridge length
  • 28 Kynar colors with 50-yr finish warranty
M 02 · Finish

Kynar 500® PVDF. Twenty-eight stock colors. Unlimited custom.

30-year non-prorated chalk-and-fade warranty. The same pigment chemistry used on Petronas Towers and Allegiant Stadium.

Matte Black
#1A1A1C
Charcoal Gray
#3D3F44
Slate Blue
#3F5168
Forest Green
#2C3A2C
Burnished Slate
#5A4A3F
Aged Copper
#7A5F47
Sandstone
#B8A888
Galvalume Plus
#9AA0A3
Standing-seam panel install
On-site roll-forming · Highland Park
M 03 · The assembly

Eight layers. Zero exposed fasteners.

01

Deck

5/8″ APA-rated sheathing inspected; gypsum or polyiso recover board on commercial decks.

02

High-temp underlayment

Self-adhered, 240°F-rated synthetic. Full coverage, six-nail pattern through clips only.

03

Ice & water

Self-adhered membrane at eaves, valleys, sidewalls, penetrations, and ridge.

04

Clips

316 stainless concealed clips at 24″ o.c. Fixed at panel center, floating at ends for thermal cycling.

05

Panels

On-site roll-formed to exact eave-to-ridge length. Zero horizontal seams on runs under 50 ft.

06

Seam closure

Snap-lock engaged by hand; mechanical 90° or 180° seam closed with electric seamer. Probe-tested.

07

Flashings

Custom-bent at our brake to a 1/32″ tolerance. Color-matched to panel. Pre-formed pipe boots in EPDM or silicone.

08

Final

Touch-up paint applied at all field cuts. Magnetic sweep. Drone flyover. Warranty registered with manufacturer.

M 04 · Against asphalt

One install. Three asphalt cycles.

 Standing seamArchitectural shingle
Lifespan50–75 yr20–30 yr
Finish warranty30–50 yr10 yr (algae)
Wind rating140 mph130 mph
Fire classAA
Impact class4 (hail)3–4 (rated lines)
Summer attic load−40%Baseline
Initial cost (tier)$$$$$
Replacements in 60 yr0–12–3
M 05 · Case file CASE-0388

Highland Park. 8,200 sq ft. Twenty-one days.

Panel
2″ Mech-seam Galvalume
Color
Charcoal Gray
Crew days
21
Warranty
50 yr finish
After
Before
Before
After
Drag to comparePhoto log · 312 frames
M 06 · Typical timeline

Twenty-one days. Inspection to flyover.

Day 0
On-site inspection
Day 3
Panel + finish selection
Day 10
Material at our yard
Day 14
Tear-off · day one
Day 21
Final flyover
M 07 · Warranty

Three warranties. Stacked.

  • 50-yr Kynar 500® finish (chalk & fade)
  • Lifetime structural panel warranty
  • Lifetime Quality Roofing workmanship
  • Manufacturer-registered to property
  • Transferable in full to next owner

Manufacturer warranty co-signed by McElroy, Drexel, or Englert — whichever line you select.

M 08 · FAQ

Standing seam, plainly.

Next service · 03 / 06
Commercial & Flat
TPO, PVC, modified-bitumen — single-source from spec to seal.