CASE-0388Residential2024
Highland Park residence.
Dallas, TX
- System
- Standing-seam Galvalume 24-ga
- Sq ft
- 8,200
- Crew days
- 21
- Warranty
- Lifetime substrate + 40 yr paint
- Pitch
- 4/12 primary, 1/2 turret
- Crew
- 6 metal specialists
Photo log · 312 frames
Brief · 01
The job.
An architect-led replacement on a 1928 Highland Park residence required panels long enough to run from ridge to eave in a single piece — up to 38 ft. We mobilized our roll-former on site and ran every panel on the driveway.
- Client
- Architect-led custom build
- Budget
- Premium spec
Scope · 02
What we did.
- Roll-formed 1.75 in mechanically-seamed standing seam, on site
- 24-ga Galvalume with Kynar 500 finish in Matte Black
- Custom copper turret panels, hand-formed in shop
- Full ice-and-water underlayment with high-temp peel-and-stick
- Snow guards on north-facing dormers
- Hidden gutter system tied into existing copper conductor heads
Materials · 03
Spec sheet.
Every component on file with the manufacturer. Warranties registered to the property address, not the homeowner.
Timeline · 04
Start to flyover.
Every phase logged with timestamped photography and synced to the homeowner's portal in real time.
- Wk 1SetupRoll-former staged, panel takeoff verified against scan.
- Wk 2FieldPrimary roof runs installed in single-piece panels.
- Wk 3Turret + close-outCopper turret hand-set, flashings, snow guards, final flyover.
Field notes · 05
What it took.
38-ft single-piece panels
Trucked panels would have required splices. We rolled on site so every run from ridge to eave is one continuous piece — no transverse seams, no leak risk.
Original copper integration
1928 copper conductor heads were retained. New hidden gutters were soldered into the existing system so the streetscape reads unchanged.
0
Exposed fasteners
0
Panel splices
312 frames
Photo log
Lifetime
Warranty
Next case file
Lakewood Distribution Center.
CASE-0356Houston, TX
Reply within 2 business hours